The house roof has a very important role for a house. Located at the very top and provides functions that are not playful for homeowners. In fact, you can say that the right roof will provide comfort for residents of the house. In addition to providing protection for residents of the house and its contents, the roof also has another function that is to enhance the appearance of the house itself. That’s why there are so many choices of roofs with various colors and attractive models. But behind this very important function it turns out that the roof has a problem that is quite draining and mind. Especially when the rainy season comes, there will be Roof Problems that need attention. To anticipate various issues about this roof you should make improvements to a number of points that are considered to be problematic when the rain has come. To make repairs would require a lot of money. Especially if you have to change the roof structure to the whole. Before it’s too late then you only need to pay more attention to the roof and then make repairs.

Sloping or Slumping Tiles
Slumping or slumping tile has become a common problem that is often unknown to the master of the house. This is only natural because not every day you check or see tile conditions. Moreover, the location of the tile is above the house. Sloping tiles will cause leakage when the rain comes. To overcome this one problem is quite easy, you just need to restore the tile in its place so that it doesn’t degenerate again. Of course you have to be careful doing this one thing, even though it looks quite easy but is quite dangerous. Instead you can repair, if you step on the tile, you can make all the tiles crack. Especially if the tile is made of clay. In general, tiles with clay are designed with angles of 27, 5 degrees to 40 degrees. And when the angle is not right, this is where the water has a way to enter. You can make a sloping angle with an angle greater than 40 degrees so that the tile position is right. If possible, you can nail the battens that are located just below the tile so that they don’t fall off easily.


Leaking on the roof
Tile is indeed one of the elements most frequently affected by weather changes. From the very hot sun to heavy rain. Changes in weather and temperature are very influential for cement on the ridge and make the tile easy to crack until it breaks. This is why it is very important to check on the roof top every once a year. In addition, gutters and ridges must also be checked and you can coat them with waterproofing to make them more durable. You can buy waterproofing at a building store. For how to use waterproof you can read the instructions that have been printed on the packaging.


Temperature in the Hot Attic
Most houses do have attics, of course the attic has a function that is very helpful for the residents of the house. It’s just that the temperature in the attic on a single day is vulnerable to heat and this affects the roof of the house. For that you can work around this by doing crossed ventilation or making cross ventilation. You can also make cavities under the tile and make vents. Installing a turbine and using insulation materials can also be an option.

The most ideal roof slope ranges from 20 to 30 degrees. And the contractors agreed on this. The factor of the slope of the roof of the house becomes one of the things that must be considered because it will greatly impact when there is water. With an ideal slope, falling water will flow immediately. That is why this ideal slope applies in terms of construction or total roof area. If the roof of the house is too sloping, the water will slow down and will gather in concrete so that it seeps or causes puddles in the concrete. By using the ideal slope, the water will flow smoothly to the ground. And vice versa, when using a roof that is too steep, it will make tiles tile.